A generic, introspectable Shader effect is not only more flexible
than a shader actor, it will also make it much easier to turn
Lightbox into an actor subclass and replace Tweener with Clutter's
own animation support.
Jonas Dreßler [Sat, 27 Jul 2019 17:29:36 +0000 (19:29 +0200)]
shellDBus: Use floats instead of percentages for OSD levels
Due to typecasting being done when converting floats to integers in
gnome-settings-daemon, a volume of 0.9% in g-s-d will end up as 0% in
gnome-shell. This can lead to a mismatch of icons between the volume OSD
(the icon to use is determined by g-s-d itself) and the shells own
volume indicator (the icon to use is determined by the shell using the
volume received from g-s-d).
To fix this, simply get rid of the conversion from float to percentage
in g-s-d and back to floats in the shell and just send a float/double
value on DBus.
verdre [Sat, 2 Feb 2019 16:58:47 +0000 (17:58 +0100)]
osdWindow: Remove LevelBar and use BarLevel directly
LevelBar is not really used, all the checks are implemented inside
BarLevel as well and the accessible name is wrong because the osdWindow
doesn't only show the volume, but also the brightness and other things.
The workaround for updating the bars width is also no longer needed now
that we have BarLevel.
verdre [Sat, 2 Feb 2019 17:01:56 +0000 (18:01 +0100)]
barLevel: Return when trying to set value to already used value
There are some cases (for example when tweening value changes), where
the level will be set to the same value it already is at. Avoid those
unnecessary repaints by checking whether the value is already used and
returning if it is.
The check is supposed to run for all merge requests that touch javascript
files, but for some reason I see it's skipped quite often. Better have
the test run unnecessarily some times than let bugs through, so remove
the limitation.
AppIcon makes itself draggable, and handles the various DnD
routines such as 'drag-begin' and 'drag-end' by making the
Overview emit the appropriate signals.
However, when destroyed, the AppIcon does not try to finish
any drag operations that started. That causes the event
blocker in AllView not to be updated correctly when dragging
icons to outside folders.
Make AppIcon emit 'item-drag-end' when a drag operation
started and it's destroyed.
Florian Müllner [Sun, 30 Jun 2019 11:05:04 +0000 (13:05 +0200)]
ci: Add eslint job to review stage
We have now reduced the number of eslint errors enough to add it to
the CI pipeline. There are still plenty of errors left though, so we
cannot simply run eslint and fail on any errors. So instead, run it
through a fancy script that:
- generates an eslint report using the "regular" configuration
- generates an eslint report using the "legacy" configuration
- creates a combined report with errors common to both configurations
When the pipeline is running for a branch or tag, the final report is
printed out and the job succeeds (we know there are errors left);
when the pipelne is running for a merge request, we fail if any errors
are reported for the lines modified/added by the MR.
GNOME apps use 'review' for the CI stage that generates and exports a
flatpak bundle after a successful build, so they need some other name
for anything that is checked before building; that's how we ended up
with the somewhat awkward 'source_check' stage (inherited from Polari).
But since the commit log check added a 'review' stage that runs pre-build,
use that for all checks that are performed before the build stage.
Florian Müllner [Sat, 29 Jun 2019 13:14:37 +0000 (15:14 +0200)]
perf: Shut up another eslint error
The functions here are asynchronous to handle control back to the
mainloop while waiting for an action to complete, not to run operations
in parallel. That is, the race condition the rule is protecting against
isn't an issue here, so disable the error.
Florian Müllner [Fri, 1 Feb 2019 00:16:20 +0000 (01:16 +0100)]
style: Disable camelcase rule for GObject properties
For GObject properties, we follow the convention of all-lowercase,
dash-separated names. Those translate to underscores in getters/setters,
so exempt them from the newly added "camelcase" rule.
Florian Müllner [Thu, 31 Jan 2019 14:07:06 +0000 (15:07 +0100)]
cleanup: Mark globals used from other modules as exported
eslint cannot figure out that those symbols are used from other modules
via imports, so they trigger unused-variable errors. To fix, explicitly
mark those symbols as exported.
Florian Müllner [Thu, 31 Jan 2019 14:08:00 +0000 (15:08 +0100)]
cleanup: Mark unused (but useful) variables as ignored
While we aren't using those destructured variables, they are still useful
to document the meaning of those elements. We don't want eslint to keep
warning about them though, so mark them accordingly.
Florian Müllner [Mon, 4 Feb 2019 11:30:53 +0000 (12:30 +0100)]
cleanup: Remove some unhelpful unused arguments
Those unused arguments aren't bugs - unbeknownst to eslint, they all
correspond to valid signal parameters - but they don't contribute
anything to clarity, so just remove them anyway.
Florian Müllner [Mon, 28 Jan 2019 00:37:12 +0000 (01:37 +0100)]
lint: Allow marking variables/arguments as unused
Unused variables or arguments can indicate bugs, but they can also
help document the code, in particular in case of signal handlers
and destructuring.
Account for this by keeping the error, but set up patterns that allow
us to opt out of if for individual variables/arguments. For arguments
we pick a '_' prefix, while for variables we go with a suffix instead,
to not accidentally exempt private module-scope variables.
This was left-over in commit 2743f18af, and probably is the real reason
why the busy spinner wasn't using the shared AnimatedIcon.Spinner class:
The animation there was much slower.
Still, let's keep the code as-is for now, if we really need a different
animation time, we can add an optional constructor parameter to the
Spinner class.
Ray Strode [Thu, 18 Jul 2019 18:49:30 +0000 (14:49 -0400)]
appDisplay: Stop watching FolderIcon parent view when destroyed
When a FolderIcon is opened, it asks the parent view to allocate
space for it, which takes time. Eventually, the space-ready
signal is emitted on the view and the icon can make use of the new
space with its popup. If the icon gets destroyed in the
interim, though, space-ready signal handler still fires.
This commit disconnects the signal handler so it doesn't get called
on a destroyed icon.
Ray Strode [Mon, 22 Jul 2019 14:57:57 +0000 (10:57 -0400)]
appDisplay: Add destroy handler for FolderIcon
It is important that the FolderView of a FolderIcon always
gets destroyed before the AppFolderPopup, since the view
may or may not be in the popup, and the view should
get cleaned up exactly once in either case.
This commit adds a destroy handler on FolderIcon to ensure
things get taken down in the right order, and to make sure
the view isn't leaked if it's not yet part of the popup.
Ray Strode [Mon, 22 Jul 2019 15:02:10 +0000 (11:02 -0400)]
appDisplay: Add AppFolderPopup destroy handler
At the moment AppFolderPopup calls popdown on destruction,
which leads to open-state-changed getting emitted after
the actor associated with the popup is destroyed.
This commit handles ungrabbing and closing from an
actor destroy handler to side-step the open-state-changed
signal.
Ray Strode [Mon, 15 Jul 2019 17:52:58 +0000 (13:52 -0400)]
appDisplay: Don't leak duplicate items in AppView
If an icon already exists in an app view with the same id, the
duplicate is not added on a call to addItem. Unfortunately,
since it's not added, the icon actor gets orphaned and leaked.
This commit address the problem by introducing a new hasItem
method and disallowing callers to call addItem with a duplicate
in the first place.
js: Add missing return values to later_add() handlers
meta_later_add() is modelled after g_idle_add() and friends, and
the handler's boolean return value determines whether it should
be scheduled again or removed. There are some places where we omit
the return value, add them (although the implicit return value of
"undefined" already gives us the intended result).
The startup/busy indication in the app menu was left out of commit 22e21ad7d1 because it doesn't use a hard-coded image, but as the
image in the CSS is actually the same used by the spinner class,
drop the "custom" styling and use the regular spinner.
Florian Müllner [Tue, 12 Feb 2019 10:07:55 +0000 (11:07 +0100)]
lint: Enforce consistent return
While all javascript functions have a return value - either an explicit
one from a return statement, or an implicit "undefined" - mixing both in
the same function is almost certainly an oversight, and more often than
not a bug.
Enable the corresponding eslint rule to catch those errors.
Trying to disable an extension that is enabled by the session mode
currently has no effect, which is clearly confusing. We could update
the various extension UIs to reflect that via sensitivity, but being
unable to configure extensions based on which session the user picked
at login isn't obvious either.
So instead, add a 'disabled-extensions' gsettings key to list extensions
that should not be enabled which takes precedence over 'enabled-extensions'
and can be used to disable session mode extensions.
extensionSystem: Move extension loading into ExtensionManager
Now that extension loading and the extensions map are no longer shared
between the gnome-shell and gnome-shell-extension-prefs processes, we
can move both into the ExtensionManager which makes much more sense
conceptually.
Didier Roche [Thu, 1 Nov 2018 12:55:17 +0000 (13:55 +0100)]
extensionPrefs: Switch to D-Bus API to get extension live state
By direclty using the underlying GSetting, whether or not an extension
appears as enabled or disabled currently depends only on whether it is
included in the 'enabled-extensions' list or not.
However this doesn't necessarily reflect the real extension state, as an
extension may be in error state, or enabled via the session mode.
Switch to the extensions D-Bus API to ensure that the list of extensions
and each extension's state correctly reflects the state in gnome-shell.
extensionPrefs: Override getCurrentExtension() for extensions
Extensions are used to calling the getCurrentExtension() utility function,
both from the extension itself and from its preferences. For the latter,
that relies on the extensions map in ExtensionUtils being populated from
the separated extension-prefs process just like from gnome-shell.
This won't be the case anymore when we switch to the extensions D-Bus API,
but as we know which extension we are showing the prefs dialog for, we
can patch in a simple replacement that gives extensions the expected API.
Didier Roche [Thu, 1 Nov 2018 12:50:30 +0000 (13:50 +0100)]
extensionPrefs: Attach extension object to each row
Each row represents an extension, so it makes sense to associate the
rows with the actual extensions instead of linking rows and extensions
by looking up the UUID in the external extensions map in ExtensionUtils.
This will also make it much easier to stop using the shared extension
loading / map in favor of the extension D-Bus API.
Didier Roche [Tue, 4 Dec 2018 08:31:27 +0000 (09:31 +0100)]
extensionSystem: Add canChange property to extensions
Whether or not an extension can be enabled/disabled depends on various
factors: Whether the extension is in error state, whether user extensions
are disabled and whether the underlying GSettings keys are writable.
This is complex enough to share the logic, so add it to the extension
properties that are exposed over D-Bus.
The existing 'ExtensionStatusChanged' signal has a fixed set of parameters,
which means we cannot add additional state without an API break. Deprecate
it in favor of a new 'ExtensionStateChanged' signal which addresses this
issue by taking the full serialized extension as parameter.
Didier Roche [Thu, 1 Nov 2018 12:55:17 +0000 (13:55 +0100)]
extensionUtils: Add functions to (de)serialize extensions
Serializing an extension for sending over D-Bus is currently done by the
appropriate D-Bus method implementations. Split out the code as utility
function and add a corresponding deserialization function, which we will
soon use when consuming the D-Bus extension API from the extension-prefs
tool.
Didier Roche [Wed, 17 Jan 2018 12:43:11 +0000 (13:43 +0100)]
extensionSystem: Add methods to enable/disable extensions
Extensions are currently enabled or disabled by directly changing the
list in the 'enabled-extensions' GSettings key. As we will soon add
an overriding 'disabled-extensions' key as well, it makes sense to
offer explicit API for enabling/disabling to avoid duplicating the
logic.
For the corresponding D-Bus API, the methods were even mentioned in
the GSettings schema, albeit unimplemented until now.
extensionSystem: Make methods to call extension functions private
While public methods to enable/disable extensions make sense for an
extension manager, the existing ones are only used internally. Make
them private and rename them, so that we can re-use the current
names for more useful public methods.
Florian Müllner [Thu, 7 Mar 2019 00:45:45 +0000 (01:45 +0100)]
extensionSystem: Turn into a class
The extension system started out as a set of simple functions, but
gained more state later, and even some hacks to emit signals without
having an object to emit them on.
There is no good reason for that weirdness, so rather than imitating an
object, wrap the existing system into a real ExtensionManager object.
extensionUtils: Move ExtensionState definition here
It makes sense to keep extension-related enums in the same module instead
of spreading them between ExtensionSystem and ExtensionUtils.
More importantly, this will make the type available to the extensions-prefs
tool (which runs in a different process and therefore only has access to
a limited set of modules).
gnome-desktop broke API in commit ca5d61cf24, as it didn't *add* a property
as incorrectly stated in the commit message, but *replaced* an existing one.
Ting-Wei Lan [Sat, 20 Jul 2019 08:28:53 +0000 (16:28 +0800)]
main: Avoid missing braces warnings when compiling with clang
Since -Werror=missing-braces is used, having missing braces warnings
aren't allowed. However, the first member of struct sigaction is a union
whose first member is a pointer, causing clang to produce warnings when
it is initialized to { 0 }.
Instead of initializing to a zero value, we can specify values of
members directly in the initializer to avoid warnings.
Commit bd18313d12 changed to a new naming scheme for battery icons,
and used to old icon names as fallback-icon-name for compatibility
with older/other icon themes.
However that fallback code isn't working correctly, as GThemedIcon's
default fallbacks will transform a name of `battery-level-90-symbolic`
to a list of names:
- `battery-level-90-symbolic`
- `battery-level-symbolic`
- `battery-symbolic`
The last one frequently exists, so instead of the intended fallback,
we end up with a generic battery icon.
Address this by specifying the icon as GIcon instead of an icon-name,
where we have more control over how the icon is resolved.
Glib stopped providing any fallback implementations on systems without
memmove() all the way back in 2013. Since then, the symbol is a simple
macro around memmove(); use that function directly now that glib added
a deprecation warning.
Florian Müllner [Tue, 4 Jun 2019 19:49:23 +0000 (19:49 +0000)]
workspacesView: Support horizontal layout
Just as we did for the workspace switcher popup, support workspaces
being laid out in a single row in the window picker.
Note that this takes care of the various workspace switch actions in
the overview (scrolling, panning, touch(pad) gestures) as well as the
switch animation, but not of the overview's workspace switcher component.
There are currently no plans to support other layouts there, as the
component is inherently vertical (in fact, it was the whole reason for
switching the layout in the first place).
Florian Müllner [Tue, 4 Jun 2019 19:22:26 +0000 (19:22 +0000)]
workspaceSwitcherPopup: Support horizontal layout
While mutter supports a variety of different grid layouts (n columns/rows,
growing vertically or horizontally from any of the four corners), we
hardcode a fixed vertical layout of a single column.
Now that mutter exposes the actual layout to us, add support for a more
traditional horizontal layout as well.
Extension preferences Application class is just a container for a GtkApplication
so instead of using composition we can inherit from the base GObject class.
Jonas Dreßler [Sat, 24 Nov 2018 23:57:00 +0000 (00:57 +0100)]
iconGrid: Make sure the style is updated before computing the layout
In some cases the style-changed signal hasn't been emitted when
_computeLayout() is called, resulting in the use of the default spacing
and item size values for the calculations.
One case where this happens is when starting a search. Right after the
initialization of GridSearchResults, _computeLayout() is called from
_getMaxDisplayedResults() and the style-changed signal hasn't been
emitted yet. The computed layout will be wrong and the maximum
number of results will also be wrong.
To prevent this from happening, make sure the style has been updated
before doing the calculations in _computeLayout().
Jonas Dreßler [Sat, 24 Nov 2018 23:57:00 +0000 (00:57 +0100)]
search: Fix calculation of max number of displayed results for grid
The calculation of how many results can be shown in GridSearchResults is
broken: The width of the parent container (resultsView.actor) we're
using as the maximum width right now is the width of the scrollView of
SearchResults (which always expands to the whole screen size). This
width will only be correct if the scrollView (ie. the whole screen) is
smaller than the max width of searchResultsContent, which only is the
case for screens smaller than 1000px.
To fix the calculation, use the width of our own actor and don't get it
using clutter_actor_get_width(), but using the last allocation of the
actor. This way we don't get the preferred width if the actor is not
allocated at this point (it's hidden by _ensureProviderDisplay() when
starting a new search).
Then, when the allocation of the actor changes, rebuild the grid search
results by calling updateSearch() with the old arguments to ensure the
number of visible results is correct. The fact that we're only listening
for allocation changes here is the reason why we never want to use the
preferred width of the actor inside _getMaxDisplayedResults(): While
the actor is hidden clutter_actor_get_width() would return the preferred
width, which we'd then use the as the maximum width. But if the actor
had a correct allocation before, no notify::allocation signal will be
emitted when the actor is shown again because the allocation is still
the same, and we'll end up using the preferred width as maximium width
forever.
Jonas Dreßler [Sat, 24 Nov 2018 21:42:51 +0000 (22:42 +0100)]
theme: Don't apply overlap-preventing padding to search results
Unlike the app grid, we show the search results while the dash is hidden
and with a small scrollbar instead of page indicator dots. This
means there's nothing the search results might horizontally overlap
with and the padding here is unneccessary.
The spacing between the search results and the screen edges is still
sufficient because of the paddings applied to searchResultsContent.
On very small screens (< 1000px), this allows the search results to
utilize a lot more of the horizontal screen space.
Jonas Dreßler [Sat, 24 Nov 2018 21:33:05 +0000 (22:33 +0100)]
search: Remove unnecessary containers
The functionality the searchResultsBin container provides can easily be
moved into a subclass of St.BoxLayout, no need for an additional StBin.
The "searchResultsBin" css class isn't used in the stylesheets either.
Florian Müllner [Tue, 28 May 2019 17:56:36 +0000 (17:56 +0000)]
power: Use more fine-grained battery levels
Adwaita-icon-theme added new battery icons which represent battery levels
in 10% steps[0]. Use these if they are available, otherwise fall back to
the existing icon names for compatibility with older icon themes.
We will always get a results array from gjs' proxy wrapper, but it
will be empty in the error case; that is, `results` is always defined,
but `results[0]` may not be.
Since ES6 it is possible to set an explicit default value for optional
parameters (overriding the implicit value of 'undefined'). Use them
for a nice small cleanup.
cleanup: Don't call method via a parent's prototype
We cannot disconnect a signal handler via the usual disconnect() as
nm_device_disconnect() shadows the GObject method, but we can use
g_signal_handler_disconnect().
Florian Müllner [Mon, 28 Jan 2019 00:45:10 +0000 (01:45 +0100)]
lint: Add "legacy" configuration
Regarding coding style, gjs is moving in a direction that departs quite
significantly from the established style, in particular when indenting
multi-line array/object literals or method arguments:
Currently we are keeping those elements aligned, while the gjs rules now
expect them to use the regular 4-space indentation.
There are certainly good arguments that can be made for that move - it's
much less prone to leading to overly-long lines, and matches popluar JS
styles elsewhere. But switching coding style implies large diffs which
interfere with git-blame and friends, so in order to allow for a more
gradual change, add a separate set of "legacy" rules that match more
closely the style we would expect up to now.
It also disables the rules for quotes and template strings - the former
because we cannot match the current style to use double-quotes for
translatable strings and single-quotes otherwise, the latter because
template strings are still relatively new, so we haven't adopted them
yet.
projects / gnome-shell.git / log